Impressions from the Mallnow wind farm, near Berlin. Our LTM 1250-6.1 was used to assemble and dismantle the CC 3800 crawler crane of our cooperation partner Prangl as well as to lift plant components of the wind turbine to be built.
The pictures show one of our 100 ton truck-mounted cranes, type GMK 4100 for steel rack construction near Stuttgart. We would like to thank our client for the trust placed in us.
MC 815, that's the name of the current flagship of the mini crane manufacturer MAEDA, which is strengthening our mini crane fleet with immediate effect. The machine has a lifting capacity of 8 tons, has a main boom of 19.60 m and can reach a lifting height of 25.5 m with a hydraulic tip. MC 815, the benchmark in the 8 tonne minicrane class.
Marco Eiter
Mini cranes department:
Tel.: + 49 (0)991 / 371 80-0
Fax.49 (0)991/ 329 15 + 49
E-mail: montage@kran-saller.de
In July it was finally time, our additional amplification in the 5-axis range has arrived. The new ATF 200G- 5 is equipped with a 60 m boom as well as a top extension of 13 m. Due to its good performance parameters, the crane can be used in almost every conceivable field of application. We look forward to your inquiry!
Disposition Autocranes Deggendorf:
Tel .: + 49 (0) 991/371 80-0
Fax .: + 49 (0) 991/329 15
E-Mail: info@kran-saller.de
Since the beginning of May until the end of August, we have been supporting our partner Felbermayr at the highest wind turbine sites in Austria, more specifically Styria, Project Handalm. Our LTM 1750-9.1 had to mount 5 units of Enercon E 82 systems at around 2000 altimeters. We would like to thank the client for their confidence in us and wish "Berg heil".
May was finally the time, our new AROCS 4152 8x8 recovery vehicle with Empl construction was delivered to us and is available immediately from our mountains team. With the 520 hp all-wheel-drive vehicle with the 20 tons of winches as well as our extensive mountain equipment, we are able to carry out every conceivable salvage.
From April 2017 the strongest 5-axle on the market, the Liebherr LTM 1250-5.1 supplements our crane fleet. The vehicle is equipped with S-tip, mounting point and second lifting gear.
Our LTM 1450-7.1 was used in the middle of March at the Schleuse Viereth near Nuremberg. The task was to lift a 29-ton jib over the sluice channel to 30 meters. We would like to thank the customer and our cooperation partner Merkel Krane from Bamberg.
Bergrheinfeld Hafenlände was the site of the largest telescopic telescope in Bavaria, the LTM 1750-9.1 at the beginning of February. The task was to unload 3 turbochargers with a net weight of 122 tonnes each at a height of 17 m from an inland waterway vessel and to switch to swath transport vehicles.
At the beginning of the year, we completed a heavy goods handling for Linde AG. Our LTM 1450-7.1 (up to 450 t) and an AC 500-2 (up to 500 t) were used by our partner AKM from Munich to hanlde the components weighing up to 184 tons.
Extrem beengte Verhältnisse, emissionsfrei sowie geräuscharm, so lautete die Devise zur Gestellungen einer Hubarbeitsbühne. Wir hatten die passende Antwort auf Lager! Bei dem Arbeitsbühneneinsatz in der Klosterkirche Metten kam eine unserer Raupenspezialarbeitsbühnen zum Einsatz.
Die Bilder zeigen unseren Liebherr MK100/100 auf verschiedenen Baustellen. Wir sind Ihr Mobilkranpartner in den Regionen Deggendorf, Passau Dingolfing, Regensburg, Straubing und Bad Birnbach. Wir freuen uns auf Ihren Lastfall!
